Retsch Mixer Mill MM 500 nano, Manual

Page: 61 / 95

Device control
61
7.9 Program mode
Press the button (N2.1) in the Main menu to switch to the Program mode. The display
changes to the current program.
Individual programs can be selected, edited, saved, deleted and started in the Program mode.
If sample materials are frequently ground with the same parameters, these parameters can be
stored in program memory locations and called up as Standard Operating Procedures (SOP),
whenever required.
Up to twelve program memory locations are available.
The following parameters can be stored in the individual programs:
•
Vibration frequency
•
Grinding time

When starting a grinding via a program, the grinding parameters cannot be changed
during the grinding process.
Fig. 40: Program mode
S2.2
S3.1
P2.1
S4
P1.1
N3.2
N1.2
B
P1N