Retsch Mixer Mill MM 500 nano, Manual

Page: 72 / 95

Device control
72

The total duration of a cycle program must not exceed 99 hours. A total duration of more
than 99 hours cannot be saved and is marked in red.
The process can be cancelled by pressing the button .
All settings made will then be discarded.

The parameters can only be changed In the Cycle program mode, if editing is activated via
the button .

Press the parameter which needs to be edited.

Turn the rotary knob until the required value is displayed.

Press the parameter again or select another parameter to ensure that the set value is
accepted.
7.10.3 Saving the cycle

Press to save the set parameters in the selected cycle preset.
7.10.4 Deleting the cycle

Tap the button (S1.2) in order to delete all parameters of a cycle programme.

Confirm the deletion by tapping the button (S2.2).

The process will be cancelled by pressing the button (N2.2).