Retsch Mixer Mill MM 500 nano, Manual

Page: 47 / 95

Operating the Device
47
6.9.1 Starting the grinding process
Fig. 29: Starting the grinding process
Component
H Device hood
T Touchscreen
DK Dial
Start the grinding process as follows:

Close the device hood (H) by hand.

Configure the parameters for grinding on the touchscreen (T) and using the dial (DK).

Press on the touchscreen (T) to start the grinding process.

The grinding process can only be started by pressing if this symbol is displayed on the
touchscreen.
If is not displayed on the touchscreen, the parameters for grinding have possibly not
been completely configured or the device hood has not been closed properly.

Wait for the end of the grinding process before finally removing the sample material.
6.10 Removing the sample material
CAUTION
C13.0024
Risks of burns and scalding
Hot grinding jar and/or sample material
−
The sample material and grinding jar can get very hot during the grinding
process.
•
After grinding, always wear protective gloves when handling the
grinding jar.
•
Never open hot grinding jars!
H
T
DK