Retsch Mixer Mill MM 500 nano, Manual

Page: 71 / 95

Device control
71

Press the symbol to start the selected cycle program and the grinding process.

Press the symbol in order to exit the cycle program mode and return to the Main menu.
7.10.2 Editing the cycle
Cycle programs can be created, edited, saved and deleted in the editor of the cycle program.
Fig. 49: Editor of the cycle program
Element Function
N1.2 Main menu Opens the main menu
N2.2 Cancel Cancels the current process and returns to the next
higher-level menu
PE Parameter settings Displays the parameters which are configured for the
active cycle program
DZ Total duration of the cycle
program Shows the total duration of the cycle program (The total
duration is made up of the two parameter sets (A/B) and
the repetitions.).

The total duration of a cycle program is limited to 99
hours.
S1.2 Delete Deletes all parameters of the cycle program
S2.3 Save Saves the cycle program

Press in the cycle program mode to call up the editor of the cycle program in order to edit
the activated cycle program.
N1.2
N2.2
S1.2
S2.3
PE
DZ