Retsch Mixer Mill MM 500 nano, Manual

Page: 26 / 95

Packaging, Transport and Installation
26
Component
TH Transport aid
The transport aid (TH) can also be used to lift the device by crane.
Transport the device by crane as follows:

Attach lifting belts to both of the transport aids (TH).

Transport the device by crane to the application site.
NOTICE The housing may be damaged if the lifting belts are too short. The four lifting belts
must be long enough to ensure a minimum distance of 100 cm between the device and the
lifting gear.
4.6 Removing the Transportation Aid
Fig. 11: Removing the transport aid
Component
TH Transport aid
S Screw
Remove the transport aids as follows:

Using a 13 mm open end wrench, loosen and remove the four screws (S), two on each
side of the device.

Unscrew and remove the transport aids (TH).

Keep the transport aids for transporting the device at a later date.
S
TH
TH S