Retsch Mixer Mill MM 500 nano, Manual

Page: 70 / 95

Device control
70
7.10.1 Selecting the cycle
In the cycle program mode, cycle programs with preset parameters for the grinding process can
be selected. In order to select a cycle program, press the button in the Main menu. The
respective number of the cycle program is displayed next to the symbol .
Fig. 48: Selecting a cycle
Element Function
N1.2 Main menu Opens the Main menu
ZN Number of the cycle
program Displays the number of the current cycle program
PS Parameter sets (A/B) A cycle program is divided into parameter sets A and B.
PE Parameter settings Displays the parameters of the active cycle program
(vibration frequency or grinding time)
WZ Repetitions of the cycle
program Indicates how often the configured cycle program is
repeated until the grinding process is completed.
B Scroll bar Indicator for the position of the cycle program
DZ Total duration of the
cycle program Shows the total duration of the cycle program until the
grinding process is completed (The total duration is made
up of the two parameter sets (A/B) and the repetitions.).

The total duration of a cycle program is limited to 99
hours.
S2.2 Editor mode Opens the editor of the cycle program
S3.1 Start cycle program Starts the grinding process or the cycle program

Swipe the display from right to left or from left to right to navigate through the cycle programs. The
position of the cycle program is shown in the scroll bar.
N1.2
B
S2.2
S3.1
ZN
PE
PS
DZ
WZ