
Specifications
71
Specifications
Input Signal
Range
ECG Sensitivity
10 to 275 BPM, 0.5 mV; 10 to 150 BPM, 0.2 mV
Respiration Sensitivity
4 to 150 BrPM @ 2 Ohms; 8 to 75 BrPM @ 0.5 Ohm; 30 BrPM
@ 0.15 Ohm
Alarms
Apnea
Delay settings of 10, 15, 20, 25, 30, 40 seconds
Low Breath Rate
Off, 4,5, 6, 7, 8, 9, 10, 12,14, 16, 18, 20, 25, 30 BrPM
Bradycardia
40, 50, 60, 70, 80, 90, 100 BPM. Optional delay of 5 seconds
Tachycardia
Off, 90, 100, 110, 130, 150, 170, 190, 200, 210, 220, 230, 240,
250, 270 BPM
Loose Connection
Base Impedance exceeds 2000
±
200 Ohms
Low Battery Warning
Battery voltage low, power cord/battery charger required
promptly
Low Battery Shutdown
Battery voltage too low to continue with out Power cord/battery
charger
Full Memory
Memory is 50% full or 80% full, repeats when memory is 100%
full
SmartMonitor 2
Memory System
Capacity
Non-Volatile Memory
2 MB
Logs
1000 Patient event listings, 1000 Equipment event listings
Waveform events*
500 HR trend and impedance; or 100 ECG QRS, HR trend, and
impedance; or 21 hours of continuous HR trend and impedance.
* Oximetry or other signals can be recorded with reduced
capacity
Signal Channels
Internal
QRS, heart rate trend, and impedance
Oximeter
Saturation and pulse, or pulse rate
External Input
Airflow, pH, strain gauge, or other low frequency physiological
signals, +/- 1.25 V maximum
Event Parameters
Internal
Apnea Record, Apnea Alarm, Low Breath Rate, Bradycardia for
Record, Bradycardia Alarm, Tachycardia Alarm
Oximeter
+3.5V to +5.0V during alarm condition
Event Duration
Alarm duration plus current pre- and post-settings totaling 45, 60,
75, 90 seconds
Apnea Record
Off or 6 to 40 seconds in two-second intervals
Bradycardia Record
Off or 50 to 100 Beats per Minute in five-BPM intervals
Electrical
Safety Standards
Meets CSA, C22.2 No. 601-1 and UL2601-1 and EN60601-1
Certification CSA/NRTL
Power Input:
SmartMonitor 2
10.5 VDC
Power Input Power
Cord/Battery Charger
120 V, 60Hz or 230 V, 50 Hz
Batteries
Rechargeable NIMH, 18 – 21 hours continuous use; recharge
time, 6 hours @ 77
°
F; Shelf life, 30 days if fully charged,
expected battery life is 2 years.
Physical
Size
HWD: 4’ x 91/4” x 9” (11.2 x 23/5 x 22.9 cm)
Weight
2.6 lbs. (1.18 kg)
Shipping Weight
8.5 lbs. (3.9 Kg)
Summary of Contents for SmartMonitor2
