Respironics SmartMonitor2 Operator'S Manual Download | Manualshive

Page: 63 / 80

background image

Transferring SmartMonitor 2 Information

57

Transferring SmartMonitor 2 Data Using a Computer

Direct Connection can download the SmartMonitor 2 data to a computer. The Synergy-E software is
required to download the SmartMonitor 2.
The SmartMonitor 2 can be placed in Communication Mode or Monitoring Mode. If Monitoring Mode is
chosen, all alarms and record parameters are functional.

Communications Mode Setup

The download cable must be connected to the SmartMonitor 2 and the computer before turning

the SmartMonitor 2 on.

Connect the download cable to the I/O connections port on the monitor and the COM Port on the

computer.

The monitor can be placed in Communications Mode.
Press and release the

POWER

button to turn the SmartMontior 2 on.

Press and hold the blue

RESET

button.

Wait until the monitor alarms constantly.
Release

the

RESET

button. Briefly press and release the

RESET

button again. The SmartMonitor

2 display will read “Monitor is in Communication Mode”.

The SmartMonitor 2 beeps every 10 seconds when it is in the Communications Mode but is not

electronically connected or linked to anything. This is a reminder that the SmartMonitor 2 is
powered on for working with the computer, memory card, or modem, but not for monitoring the
infant.

Refer to the Synergy-E software for instruction on Direct Connection Downloading of the

SmartMonitor 2.

«
...
61
62
63
64
65
...
»

Summary of Contents for SmartMonitor2

















































































Reviews:

No comments

Related manuals for SmartMonitor2

Brand: MacDon Pages: 89

Brand: Yates Pages: 2

Brand: JAC Pages: 100

Brand: K&K Pages: 8

Brand: Bang & Olufsen Pages: 2

Brand: Barreto Pages: 20

Brand: Barreto Pages: 18

Brand: Backyard Discovery Pages: 41

Brand: Maeda Pages: 276

Brand: Tascam Pages: 78

MINISTUDIO CREATOR US-42

Brand: Tascam Pages: 11

Brand: Yamaha Pages: 48

Brand: Zimmer Pages: 2

Brand: ZipRip Pages: 31

Brand: Feniex Pages: 5

Brand: IBC Pages: 4

Brand: PMK Pages: 24

Brand: SteelFlex Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands