Reson SeaBat 7125 ROV, Operator'S Manual

Page: 74 / 200

SYSTEM OPERATION
SeaBat 7125 ROV Operator‟s Manual
Page 58 May 30, 2011
Version 3
5.3.6 Freeze the Sonar Image
Clicking the Freeze button prevents the image on the Primary Display tab from being
updated while all other sonar functions continue. This allows prolonged viewing of a
particular item.
Click the Resume button to allow updates to continue.
5.3.7 Maximize the Sonar Image
Clicking the Max button hides the lower set of tabs and enlarges the sonar image to fit
the entire SeaBat window. This allows close inspection of data.
Click the Min button to return the image to normal size and display the lower set of tabs.
5.3.8 Change Modes
The Mode drop-down menu allows the operator to select between the following options.
Manual: View data being collected now.
Auto Pilot: Disables the operator selection of certain parameters (such as
range, gain, power) and allows the SeaBat to automatically adjust sonar
settings based on the bottom detection data. For details, see
section 4.2.9
Edit Auto Pilot Settings .
Playback: View a previously collected data file. Selecting Playback mode
adds the Playback tab to the lower set of tabs (see section 5.7.8 below ).
5.3.9 Identify Beam Track, Depth, and Range (or Channel and Sample)
To the right of the Mode drop-down menu the beam Across Track, Depth, and Range
readings are displayed for a particular point on the sonar wedge display. Readings are in
meters.