Reson SeaBat 7125 ROV, Operator'S Manual

Page: 44 / 200

SYSTEM CONFIGURATION
SeaBat 7125 ROV Operator‟s Manual
Page 28 May 30, 2011
Version 3
On the Motion tab it is possible to view motion format information and current
data as well as a variable graphical display of roll history (see section 5.4
Motion Tab ).
NOTE
The system will recall the motion settings used during the last sonar operation. In the
event that the default settings are used, Roll Stabilization will be enabled on startup.
4.2.7 Load
The Load option allows the operator to load a set of saved sonar settings from a file. For
example, you may develop specific settings that are optimal for mapping in a certain
location or region. Upon returning to that area, the saved settings can be loaded from a
file. The sonar must be pinging to load a configuration.
1. Verify the Mode is set to Manual and the Max Rate slider on the Main Sonar
Settings tab is not OFF (see appropriate subsections in chapter 5 System
Operation ).
2. Select the Load option from the Configuration menu to access the Open
dialog.
3. Browse to the correct location and select the .cfg file you want to load.
4. Click Open.
4.2.8 Save Current
The Save Current option allows the operator to save the current sonar settings to a file,
to be loaded later in matching environments.