Reson SeaBat 7125 ROV, Operator'S Manual

Page: 128 / 200

TROUBLESHOOTING
SeaBat 7125 ROV Operator‟s Manual
Page 112 May 30, 2011
Version 3
Message Description Action
Could not create UDP server Indicates a network resource
was unavailable to the
software from the operating
system. Check user
permissions, network
drivers.
Could not create TCP server
Could not create PCI server Software detected a failure to
configure the main data
acquisition and distribution
module (PCI). This can be
caused by errors in the
configuration files, or
corrupted installation. Reboot the PC, call
RESON support.
Error creating PCI Reader thread
Error creating PCI Copier thread
Create TCP socket failed, code…
Operating system did not
allow creating of network
resources. Check Windows
installation, user
settings, and network
resources.
Error creating non-sonar data
reader thread BITE module has failed to
initialize. Check Windows
installation and
resources.
Failed to allocate memory for
ADMXRC read The software could not
allocate enough system
memory to perform the
operation. Make sure no other
software is running on
the processor. Reboot
the system.
Failed to allocate memory for
ADMXRC transfer
Failed to set up DMA Card 0 The software could not
access the processing card
device. Check ADMXRC
drivers.
Failed to set up DMA Card 1
Internal 7k Center error One or more startup
conditions have failed. Check previous alarms
or warnings and verify
software installation.
Internal error, 7kCenter NOT fully
operational
Inbound memory initialization failed PC resources are
inadequate. Check RAM or virtual
memory resources
MMF Outbound memory creation
…
Required file: "7k_0.xml" or
"7k.xml" Not found. A critical startup configuration
file was missing or too many
were found. Reinstall the software.
Required file: "7k_Bite.htm" Not
found.
SET UP: NO TOP BIT FILE
MATCH for Device <x>,
Enumerator <x>
SET UP: TOO MANY BIT FILES
(Max = x)
SET UP: FAILED TO LOAD BIT
FILE "<x>" for Device <x>,
Enumerator <x>