Reson SeaBat 7125 ROV, Operator'S Manual

Page: 36 / 200

SYSTEM CONFIGURATION
SeaBat 7125 ROV Operator‟s Manual
Page 20 May 30, 2011
Version 3
4. In the Review Connection dialog, review the information entered to make
sure it is correct.
a. If you want to make changes, click Back to move back through the
previous steps.
b. If you are satisfied that this is the connection you wish to create, click
Finish to complete the process.
c. If you decide not to create a broadcast at this time, click Cancel to
terminate the process without creating the new broadcast.
4.2.2.2 Edit an Existing Broadcast
To edit an existing broadcast, select the broadcast you wish to edit in the UDP
Broadcasting dialog and click the Edit button, and then follow the same instructions as in
section 4.2.2.1 Add a New Broadcast .
4.2.2.3 Delete a Broadcast
To delete an existing broadcast, select the broadcast you wish to delete in the UDP
Broadcasting dialog and click the Delete button. A pop-up window will appear, asking
you to confirm that you wish to delete the selected record. Click Yes to continue.