Reson SeaBat 7125 ROV, Operator'S Manual

Page: 24 / 200

SAFETY PRECAUTIONS
SeaBat 7125 ROV Operator‟s Manual
Page 8 May 30, 2011
Version 3
2.2.2.3 Replacement of Battery on PC Motherboard
CAUTION
Battery to be changed by authorized personnel only.
Noncompliance may affect warranty situation (see Appendix F Warranty Information ).
Use only the correct type of onboard CMOS battery as specified by the manufacturer.
Do not install the onboard battery upside down to avoid possible explosion.
2.3 Electrical Isolation
Electrical isolation for both titanium and aluminum components may be achieved by
using nonconductive bushings, washers, and isolation plates to insulate them from the
mounting brackets. Common nonconductive materials include Delrin, G-10/FR4 glass
fiber sheets, and high-density polyethylene sheets.
NOTE
Contact RESON for additional information on schemes for electrical isolation.
2.4 Exposure to Sunlight
Do not allow the projector and receiver arrays to sit in direct sunlight when not in use,
but cover the arrays with a bag. In addition to furthering corrosive effects, continued
exposure to ultraviolet (UV) rays will damage the polyurethane array face.
2.5 Safe Disposal of Waste (WEEE Directive)
The use of the crossed-out dustbin logo indicates that this product is
subject to directive 2002/96/EC, known as the Waste Electrical and
Electronic Equipment Directive. The WEEE Directive specifies that used
electric/electronic equipment may not be treated as household waste, but
must be sorted separately for disposal. These rules concern all your
RESON products (computer, monitor, transducer, processor, probe, etc.)
and also all accessories (keyboard, mouse, etc.). By ensuring this
product is disposed of correctly, you will help protect the environment.
For more detailed information about the recycling of this product, please contact your
local authority, your household waste disposal service provider, or RESON Customer
Support (
support@reson.com )