REINHARDT
System- und Messelectronic GmbH
Bergstr. 33 86911 Diessen-Obermühlhausen Postfach 12 41 D-86908 Diessen Tel. 08196 - 934100
MWS_55_e.indb Page 87
geändert am 04.12.2020 von DO
Manual MWS 55 / MWS 88 / MWS 10 and Sensors 55
More additional modules you can find here:
http://www.reinhardt-testsystem.de/english/climate_sensors/additional_modules.php
7.2 Available displays
7.2.1 Meteograph
Precision analog display with high grade stepping motors.
For indoor use only.
7.2.2 DKA1
LED mini display for alternating of up to 9 values. 13 mm digit size.
For indoor use only.
7.2.3 DMMK
Small digital meteo display for displaying 10 parameters simultaneously with digit size 13 mm.
Available for wall mounting or placing on a table.
For indoor use only.
7.3 GPS-Receiver
When performing mobile measurements at different locations the position data on which the
measurements were carried out may be important. For this case we offer a GPS receiver (Garmin
GPS18x LVC - 5V) for storing the position data, altitude and accurate time.
The longitude has got the identifier GX, the latitude the identifier GY.
A data set of stored data looks like that: GX10.9991,GY47.9850.
The position data here are: Longitude: 10° 59' 56.8", Latitude: 47° 59' 06.0".
The GPS receiver is powered by the MWS 55V, and transmits data by default with 9600Baud.
This baud rate is retained even if the baud rate of the actual data of the MWS 55V is changed over.
Please note that the clock of the MWS 55V with connected GPS receiver can no longer be set via
the serial interface, but only by the GPS receiver!
When using the Reinhardt-software you should start it with the parameter -GPS (see weather32
manual)