manualshive.com logo in svg

Reinhardt MWS 10, Manual, Page: 10 / 141

Share
Download
Reinhardt MWS 10 Manual Download Page 10

MWS_55_e.indb Page 10

Manual MWS 55 / MWS 88 / MWS 10 and Sensors 55

geändert am 04.12.2020 von  DO

REINHARDT 

System- und Messelectronic GmbH

Fax: 08196/7005 and 1414 email: 

[email protected]

  Web: 

http://www.reinhardt-wetterstationen.de

to table of contents

1.3 Mounting

The weather station is mounted on a 1" water-pipe. This pipe must be fixed very well to stand 

high wind speeds above 200 km/h when the weather station is mounted. 

The weather station is to be fixed well onto the 1" pipe with the screws. The stability of the weather 

station on the pipe must be established. Really check this after mounting the weather station! 

Please  mount  the  weather  station  on  a  place  you  easy  can  reach  for  mainte-

nance  purposes  for  the  station  can  not  be  guaranteed  to  be  absolutely  mainte-

nance  free,  i.e.  the  precipitaion  sensor  needs  to  be  cleaned  regularly  (MWS10)!!!!  

Take care that no water can splash onto the MWS 55 from below. Otherwise water may 

soak into the MWS 55 and damage the weather station!!

You'll  also find advice for mounting the weather station on your Weather-USB-Stick.

2 Setting Up the Weather Station

2.1 Installation of Hardware

MWS 55 Weather Station has been designed for measuring the most important weather para-

meters temperature, humidity, barometric pressure, wind di rection, wind speed and precipitaion 

and global solar radiation (MWS 10). 

All parameters can be displayed graphically, digitally or as an "multiple display".

There is also a statistics and a history function.

Mount the weather station on a 1 " pipe. Orient the North-marker to North and clamp MWS 55 

in place with the two pre-mounted high quality steel screws. Take care that the pipe is mounted 

as perpendicularly as possible, otherwise the windvane will not work properly and will preferably 

rotate in one direction.
 

N.B.

The wind vanes of the MWS 55 weather station are very sensitive sensory equipment which can 

easily be destroyed by mechanical influence.

Therefore do keep the packing of your weather station. Whenever you want to ship your weather 

station later, this packing guarantees that the weather station is not damaged in transport !! Time 

and again we have noticed that the units are damaged by wrong packing. This is very annoying 

for the customer because he has to pay for all costs that may arise.

Please ask for a quotation of an original packing if it is no longer available to you 

(

see packing MWS 55

).

The weather station must be set up at a place which is exposed to wind, because otherwise wind 

direction  and  wind  speed  cannot  be  measured  correctly.  (Please  see  "Directions  of  Deutscher 

Wetterdienst").

It is also important, that no water is splattering onto the MWS 55 from below! 

Connect the 

enclosed cable

 as follows:

Connect the 9pole connector to a free serial interface of your PC or to an USB port with a suitable 

COM to USB converter (with driver software which creates a virtual COM port). 

Plug the power supply into a power outlet 100-240VAC / 50-60Hz.

Another option is PoE which allows supplying the MWS 55 via the network cable. 

Power supply with PoE does not supply the the optional heating device. The heating device is 

supplied with an extra cable and own power supply!  

Summary of Contents for MWS 10














































































































































Reviews:

No comments