MWS_55_e.indb Page 125
Manual MWS 55 / MWS 88 / MWS 10 and Sensors 55
geändert am 04.12.2020 von DO
REINHARDT
System- und Messelectronic GmbH
Fax: 08196/7005 and 1414 email:
http://www.reinhardt-wetterstationen.de
ADMIN SET ADDRESS
<IP-Address>
ADMIN SET ADDRESS
<MAC-Address>
ADMIN SET ADDRESS
<MAC-Address> <IP-Adress>
ADMIN SET ADDRESS
<MAC-Address> '<Password>'
*ADMIN SET ADDRESS
<IP-Address>
*ADMIN SET ADDRESS
<MAC-Address>
*ADMIN SET ADDRESS
<MAC-Address> <IP-Adress>
*ADMIN SET ADDRESS
<MAC-Address> '<Password>'
Here you can specify an administrator address (MAC and / or IP address) that should have full
access to the weather station. The input is similar to ADMIN SET INCLUDE, which means
that address ranges can also be entered, but this is not recommended. There should be a unique
address here,
e.g.
ADMIN SET ADDRESS 90-1B-0E-23-45-67
This would give the client with MAC address 90-1B-0E-23-45-67 administrative access. You could
also enter an IP address to restrict the location,
e.g.
ADMIN SET ADDRESS 90-1B-0E-23-45-67 192.168.10.0/24
would only accept commands from the client when it is sending from the local network and its IP
address starts with 192.168.10 (24 bits for the compare mask).
The use of a single IP address is of course possible, although not so save, as well as the entry of
address ranges.
ADMIN SET ADDRESS 192.168.10.25
for example, only allows one IP address,
while
ADMIN SET ADDRESS 192.168.x
(or
ADMIN SET ADDRESS 192.168.0.0/16
) allows
all IP addresses as administrators starting with 192.168..
The same can be done with the MAC addresses, e.g.
ADMIN SET ADDRESS 90-1B-0E-23-4x
allows all clients whose MAC address starts with 90-1B-0E-4 as administrator.
MAC addresses must be entered in hexadecimal notation and with - (minus signs) as byte sepa-
rators, IP (V4) addresses in decimal notation with . (full stop) as separators.
Instead of an IP address, a password can also be entered together with the MAC address in order
to gain access to the contents of the HTPASS folder [since of V3.0242].
The password must necessarily be enclosed in single quotes and may consist of max.15 characters
from the following:
<SPACE>0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwx
yz_#@§$%&/()=~
e.g.
ADMIN SET ADDRESS 90-1B-0E-23-45-67 'nimdA'
ADMIN GET ADDRESS
*ADMIN GET ADDRESS
returns the Administrator address, defined by
ADMIN SET ADDRESS
.
ADMIN ADDRESS
>MAC 90-1B-0E-23-45-67 & IP 192.168. 0. 0/16 (C0.A8.xx.xx)
If no address is defined yet, or if it was deleted with ADMIN REMOVE ADDRESS, three minus
signs are displayed.
ADMIN ADDRESS
>---