MWS_55_e.indb Page 120
Manual MWS 55 / MWS 88 / MWS 10 and Sensors 55
geändert am 04.12.2020 von DO
REINHARDT
System- und Messelectronic GmbH
Fax: 08196/7005 and 1414 email:
http://www.reinhardt-wetterstationen.de
*ADMIN GET ETHERNET DATA
This command shows statistics about the previous received and sent IP-/ICMP-/TCP-/UDP-packets
via the Ethernet port:
ETHERNET DATA
>IP
|->Rec'vd Pkts: 2577
|->Sent Pkts: 307
|->Dropped Pkts: 2269
|-->Ver/Hdr Errs: 2
|-->Length-Hi Errs: 0
|-->Length-Lo Errs: 0
|-->Fragmt Errs: 0
|-->Chksum Errs: 0
|-->Proto Errs: 0
>ICMP
|->Rec'vd Pkts: 0
|->Sent Pkts: 0
|->Dropped Pkts: 0
|->Type Errs: 0
>TCP
|->Rec'vd Pkts: 308
|->Sent Pkts: 307
|->Resent Pkts: 0
|->Rec'vd Rsts: 1
|->Dropped Pkts: 0
|-->Chksum Errs: 0
|-->Ack-Num Errs: 0
|-->Conns Ovrflw: 0
|-->Conns Bad Ports: 0
>UDP
|->Rec'vd Pkts: 0
|->Sent Pkts: 0
|->Dropped Pkts: 0
|-->Chksum Errs: 0
8.3.7 Changing the port number
With the following command you may change the standard port number to the same port number
as our WLAN modules or TCP/IP converters are set to (10001). :
!XW0007c9e0,504b39bb06c1507e115504b60000000000
With the following command you set the port number back to standard (20002):
!XW0007c9e0,504b39bb06c1507e22aa37b60000000000
You may change the port number also to any other number but it is not recommended to perform!
