2. Install the RED Lens Control Motor Mounting Bracket.
A. Push the lock button on the RED Lens Control Motor Mounting Bracket to disengage the locking mechanism.
B. Slide the dove-tail rail on the RED Lens Control Motor Mounting Bracket into the dove-tail slot on the RED
Lens Control Motor.
C. Release the lock button.
D. Tighten the M4 thumbscrew on the side of the Lens Control Motor Mounting Bracket to lock the bracket in
place.
3. Mount the RED Lens Control Motors to the support rods.
A. If you are using 15mm support rods, install the 19mm-to-15mm Reducer Bushings into the clamp.
B. Position the RED Lens Control Motors on the support rods.
C. Use the thumbscrew to tighten the clamp on the RED Lens Control Motor Mounting Bracket.
NOTE:
For more information, go to
"Lens Control Motor" on page 46
Figure: Mount RED Lens Control Motors
CONNECT THE 3-AXIS SYSTEM
1. Connect the RED Lens Control Motors.
A. Connect the RED W.M.D. Motor Cable to the pivoting connector on each RED Lens Control Motor.
B. Connect the opposite end of the RED Lens Control Motor Cable to the lens function that you want.
C. Repeat instructions A and B for additional motors.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 4 4 , R EV - H
|
1 4
RED 3-AXIS SYSTEM OPERATION GUIDE
