RED START/STOP CABLE (1B TO SYNC, CTRL, BNC)
The RED Start/Stop Cable (1B-to-Sync/Ctrl/BNC) provides start/stop and tally support through the RED W.M.D. The
14-pin 1B LEMO connects to the EXP port on the W.M.D, and transfers the tally signal from the camera to the W.M.D.
The 4-pin LEMO connects to the CTRL port on the camera. The BNC connector connects to the SYNC port on the
camera via a 3BNC-to-00 LEMO Sync Cable and a BNC-to-BNC Adaptor, and transfers the start/stop signal to the
camera. RED offers the following cable:
790-0415: RED Start/Stop Cable (1B to Sync, CTRL, BNC)
NOTE:
Full support for start/stop requires the 3BNC-to-00 LEMO Sync Cable and a BNC-to-BNC Adaptor (both are
included with the RED 3-Axis Lens Control System). The 3BNC-to-00 LEMO Sync Cable has two (2) additional BNC
connectors that offer support for timecode and genlock.
NOTE:
When using the RED Start/Stop Cable (1B to Sync, CTRL, BNC), you must configure the W.M.D. for DSMC
start/stop operation only. On the W.M.D., go to
Select
>
Start/Stop
>
DSMC
.
Figure: RED Start/Stop Cable (1B to Sync, Ctrl, BNC)
RED START/STOP CABLE (1B TO SYNC, CTRL, BNC)
#
CONNECTOR
PART NUMBER
1
J1
LEMO FGG.1B.314.CLAD42Z
2
J2
Amphenol
®
31-710013
3
J3
LEMO FGG.00.304.CLAD30Z
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 4 4 , R EV - H
|
8 6
RED 3-AXIS SYSTEM OPERATION GUIDE
