INSTALL THE 3-AXIS SYSTEM
These instructions show a tactical cage or other cheeseplate. For more information and other installation methods, go
to
1. Mount the W.M.D.
A. Remove the guide pin from the recessed storage location on the bottom of the unit.
B. Insert the guide pin into the bottom right mounting hole on the back of the W.M.D. for 18 mm mounting
configurations. Use the left mounting hole for 25 mm configurations.
Figure: Install the W.M.D. Guide Pin
C. Position the W.M.D. on the mounting platform, using the guide pin for alignment.
NOTE:
Ensure that you leave enough clearance on the sides to connect cables.
D. Push in and turn the 1/4-20 captive thumbscrew to initiate threading.
Figure: Mount the W.M.D
E. Tighten the thumbscrew.
WARNING:
DO NOT OVERTIGHTEN.
C O PYR I G HT © 2 0 1 7 R ED.C O M , LLC
9 5 5 - 0 0 4 4 , R EV - H
|
1 3
RED 3-AXIS SYSTEM OPERATION GUIDE
