Tap
Application Run Flow
. Make sure the ONLY file listed under "Active Application"
is
MotoPlusYRC1u_5.out
.
2
If
MotoPlusYRC1u_5.out
is in the "Inactive Application" section instead, highlight it
and press "
-> Add
" to set the app as active.
3
If you see any other apps listed under "Active Application," highlight them and press
"
<- Remove
."
4
Press
Set Flow
, then tap Close until you are out of the Monitor.
5
If you made any changes, restart the controller. Once the controller has restarted,
enable Safety Mode and check again to make sure the correct application is
running..
6
From the Main Menu, tap
EX. MEMORY
, then tap
FOLDER
to select the folder to load files
from.
Tap the
forge-os
folder to open it, then tap to open the
yaskawa
folder. At the top
of the screen, the
TARGET FOLDER
should be
yaskawa
.
1
From the Main Menu tap
EX. MEMORY
and then tap
LOAD.
2
8
VERSION 1.0.0
© 2021 COPYRIGHT READY Robotics ALL RIGHTS RESERVED
44
