Series 1780 Dynamometer User Manual V1.1
Document ID: Q2D4F5
Publish date: 2020-03-06
6.1 Connecting to the tool
Fig. 6.2: Connecting the tool
Fig. 6.2 shows the connection section of the software. Normally, you do not need to install
any drivers for the tool to be detected. In Windows, you might have to wait a few minutes for
the OS to automatically download the driver in the background (an Internet connection will
be required).
To confirm the software detects the tool, connect the USB cable and the power adapter to
the main board. Then the COM port will automatically change to the newly connected tool. If
you disconnect the USB cable, the COM port will switch back to another one.
If the COM port does not automatically switch when connecting the tool, please contact us or
try troubleshooting driver issues:
https://www.rcbenchmark.com/learning-center/troubleshooting-driver-issues/
The product already comes preloaded with the correct firmware, but future GUI updates
might require you to flash a new firmware. If a firmware update is necessary, the software
will notify you. The process is very simple, just follow the on-screen instructions.
We highly recommend you watch our two introductory videos on using the software. They are
only five minutes each and will teach you all you need to know in order to automate tests:
https://rcbenchmark.gitlab.io/docs/en
The software was designed to be easy to use. In case you need help understanding some
features, please email us at
and we will more than happy to help
you.
Copyright 2019 - Tyto Robotics Inc.
Page 63/65
