Series 1780 Dynamometer User Manual V1.1
Document ID: Q2D4F5
Publish date: 2020-03-06
4.3.4 Install the motor mount assembly on the load measurement unit
Once you finish putting the motor and the optical probe on the motor mount, you can now
install the whole assembly onto your load measurement unit.
IMPORTANT!
It is recommended to mount your propeller after the motor is fixed onto the load
measurement unit.
Check the motor screws if they have been well fastened before this operation. You will no
longer be able to reach them after the assembly was put onto the load measurement unit.
You will need to prepare the following material in order to carry out this operation:
Item name
Item SKU
Qty
Located in (SKU# if exist)
Motor mount assembly with
motor, optical RPM probe
N/A
1
Assembled in previous steps
Load measurement unit
assembly, installed on the
support
N/A
1
Assembled in previous steps
Load measurement unit and
motor mount fasteners bag
VQMD
1
Accessories and fasteners for
assembly box (#BCJE)
Within the load measurement unit and motor mount fasteners bag (SKU#: VQMD) into the
accessories and fasteners for assembly box (#BCJE) previously used, you can find:
Item name
Item SKU
Qty
M5 x 12mm Socket screw
2HEX
9
M5 x 20mm M-F standoff
CTKG
9
M5 split lock washer
T9DQ
9
Spacer M5 x 19mm
MVAK
6
M5 x 0.8 mm - 40mm long screw
QACR
6
M5 x 0.8mm Nylon-Insert locknut
BAKT
6
Copyright 2019 - Tyto Robotics Inc.
Page 42/65
