Series 1780 Dynamometer User Manual V1.1
Document ID: Q2D4F5
Publish date: 2020-03-06
Fig 4.19: Load measurement unit inside the protective case
Please keep all the components of the protective case together, if repairs are necessary, ship
the unit back with the casing. If you are not able to ship the load measurement unit back with
the protective casing for repair or recalibration, we will return the unit back with a new
protective casing but a USD$140 charge will be applied.
IMPORTANT!
Do not tamper with any screws sealed in orange paint on the load measurement unit, as a
recalibration of the whole unit will be needed upon reassembly. Your test results will be
affected if the calibration data is not valid. Currently, the load measurement unit can only be
recalibrated in an RCbenchmark facility, please contact us for a quote when needed.
4.2.2 What’s included
The Series 1780 Dynamometer 75kgf-500A: A side (SKU#: KURKE), you will receive one
75kgf-40Nm load measurement unit in the carton box:
Item name
Item SKU
Qty
Series 1780 load measurement
unit 75kgf-40Nm: A side
FVET
1
Copyright 2019 - Tyto Robotics Inc.
Page 30/65
