Series 1780 Dynamometer User Manual V1.1
Document ID: Q2D4F5
Publish date: 2020-03-06
4.4.4 Fixing the power and control console on the support plate
You need to prepare the following material for the installation:
Item name
Item SKU
Qty
Located in (SKU# if exist)
Power and control console 500A:
Side A
ZSTS
1
Power and control console
package (#EMDG)
Fasteners bag for power sensor
HGQX
4
Power and control console
package (#EMDG)
When you are about to install other unit or other rating, simply follow the same steps:
❏
Take out the Power and control console Side A (#ZSTS) and the Fasteners bag for
power sensor (#HGQX).
❏
On the power and control console (#ZSTS), there is a metal strip in the back with two
holes. Screw one button head 5/16-18” screw (#KEDB) through the holes on the strip
and connect the other side with one end-feed T-nut 5/16-18” (#YREC). Do it for both
holes.
❏
Then, join the whole assembly into a T-slotted frames 4’ long (#HJXQ) by inserting the
T-nuts into the slot, as image in Fig 4.33:
Fig 4.33: Join the power and control console on the support
Copyright 2019 - Tyto Robotics Inc.
Page 50/65
