Series 1780 Dynamometer User Manual V1.1
Document ID: Q2D4F5
Publish date: 2020-03-06
Fig. 4.11: Gussets (#YKPV ) and one L-bracket (#KPHT) fix on the T-slotted frame 4” (#WHXZ)
❏
Make the second assembly as Fig 4.11 with the supplied components.
❏
Fix the assemblies from the last step at each end of the two T-slotted double beam 3’
(#LNKY), connect and make it a closed structure with button head 5/16-18” screws
(#KEDB) and T-nuts (#YREC), as shown in Fig 4.12:
Fig. 4.12: Fixing of T-slotted frame 3’ (#LNKY) with T-slotted frame 4” (#WHXZ)
❏
Take four button head 5/16-18” screws (#KEDB) and four end-feed T-nuts 5/16-18”
(#YREC) out of the beam fasteners bag (#WVKM).
❏
Insert one button head 5/16-18” screw (#KEDB) into one gusset bracket (#YKPV) used
in the vertical assembly and one end-feed T-nut 5/16-18” (#YREC).
❏
Repeat the last two steps to finish the assembly of the lower part of the support.
Copyright 2019 - Tyto Robotics Inc.
Page 24/65
