18
Searching with the tape counter (go- to search)
1
1
2
2
■
You can mark a segment of the video cassette with the tape counter that will help you easily locate the
segment later.
Press the [SETUP] button and select
“FUNCTIONS” from the SETUP menu.
The FUNCTIONS menu is displayed.
Select “Go-To Search” from the
“FUNCTIONS menu.
The tape counter is displayed on the screen.
Input the tape counter you want to go to and
press REW or FF. The VCR will search for the
time counter you want.
Some index
marks may be
missed by the
VCR :
• A mark too close
to your current
location on the
tape.
• The mark at the
beginning of a
recorded segment
of five minutes or
less.
• The first index
mark on the tape
when you start at
the beginning of
the tape.
FUNCTIONS
Auto Play:
ON
Auto TV/VCR:
ON
Index Search
Go-To Search
GO-TO SEARCH
Current tape counter is
2 : 17 : 18
Press REW or FF
to go to - : - - : 00
Marking a tape for zero search
1
1
Use PLAY, REW, or FF to reach for the point on the tape where you want to mark as
0:00:00.
2
2
Press the [DISPLAY] button to display the tape counter on the screen.
3
3
Press [CLEAR] to reset the tape counter to 0:00:00.
4
4
You can continue to play the tape or perform other functions with the VCR.
Using advanced features
Display (O.S.D)
1
1
Press the [DISPLAY] button once to display the tape counter, clock and status mode
on the TV screen.
2
2
Press the [DISPLAY] button the second time and only the tape counter remains on the
screen.
3
3
Press the[DISPLAY] button the third time and the tape counter also disappears from
the screen and to return to the original display.
RTD300 EN 7/25/03 2:36 PM Page 22
