Raymarine hsb2 PLUS, Owner'S Handbook Manual

Page: 65 / 228

Chapter 3: Getting Started & Adjusting the Display 3-1
Intr
oduc
tio
n
Chapter 3: Getting Started & Adjusting the
Display
3.1 Introduction
This chapter provides information, instructions to get you started using the
hsb 2
Plus Series Fishfinder displays. It will help you to become familiar with
the display and the functions of the controls before you start using the unit.
More detailed information on operating the Fishfinder display is provided in
Chapter 4 . Chartplotter operating details are given in Chapter 5 and
Chapter 6 .
Conventions Used
Throughout this handbook, the dedicated (labelled) keys are shown in bold
capitals; for example,
MENU
. The soft key functions, menu names and
options are shown in normal capitals; for example,
SCREEN
.
Operating procedures, which may consist of a single key-press or a sequence
of numbered steps, are indicated by a
➤
symbol in the margin.
When the procedure requires you to press a soft key, the soft key icon is shown
in the margin.
Simulator
The display unit includes a simulator function, that allows you to practice
operating your Fishfinder or Chartplotter (Raychart models only) without data
from the transducer or GPS system. You will need to use the set up options to
switch the display to simulator mode, as described in
Section 3.2 .
You need to connect the display to a 12V or 24V DC power supply, connecting
the red wire from the power lead to positive (+) and the black wire to negative
(-). See
Chapter 2 for full details.
The following section, Section 3.2 , includes instructions to view simulated
fishfinder and chart images.