Raymarine hsb2 PLUS, Owner'S Handbook Manual

Page: 144 / 228

5-34 hsb
2
Plus Series Fishfinders
St
op
F
o
llo
w
or S
top
Goto
2. Press the
GOTO WAYPOINT
soft key.
Navigation to the selected waypoint begins. The soft key
STOP GOTO
is dis-
played.
3. To return to the default soft key display, move the cursor away from the
waypoint or press
ENTER
or
CLEAR
.
➤
To navigate directly to the cursor position:
1. Use the trackpad to position the cursor as required.
2. Press the
GOTO
default soft key, followed by
GOTO CURSOR
.
If navigation is currently in progress you are warned “Already following
route. Cancel route and goto cursor?”.
To cancel the
GOTO CURSOR
operation, press
NO
.
To continue with the
GOTO CURSOR
operation (and stop the current
GOTO
ROUTE
), press
YES
.
The chartplotter places a temporary waypoint as the target and starts to
navigate towards it. The waypoint is shown as a square with a circle and
dot in the center, and is connected to the vessel’s starting position with a
dashed line.
The soft key
STOP GOTO
is displayed.
Note: The temporary waypoint is not added to the waypoint list; when the
GOTO
is complete, or is stopped, the temporary waypoint is erased.
3. To return to the default soft key display, move the cursor away from the
waypoint or press
ENTER
or
CLEAR
.
Stop Follow or Stop Goto
➤
To stop following the route or target point
either:
If necessary, press the
GOTO
soft key, then press the
STOP GOTO/FOLLOW
soft
key.
Or:
Move the cursor over any waypoint or leg in the current route, then press the
STOP GOTO/FOLLOW
soft key.
The dotted line from your vessel to the target waypoint disappears.
GOTO
WAYPOINT
GOTO
GOTO
CURSOR
STOP
GOTO
GOTO
STOP
GOTO
STOP
FOLLOW