Raymarine hsb2 PLUS, Owner'S Handbook Manual

Page: 119 / 228

Chapter 5: Standard Chart Operations 5-9
Pla
ci
ng a W
ay
poin
t
• Placing a Waypoint
• Selecting a Waypoint
• Displaying Waypoint data
• Editing a Waypoint (symbol, name & position)
• Erasing a Waypoint
• Moving a Waypoint
At the end is a section about using the ST80 Navigator Keypad to select, edit,
and name your waypoints.
Placing a Waypoint
The scenario Place and Goto a Waypoint on page 5-44 provides a simple
example of how to place a waypoint.
➤
To access the place waypoint soft keys, press
MARKS
:
➤
To place a waypoint at the cursor position or at the vessel position:
1. Press either the
PLACE WPT AT CURSOR
or the
PLACE WPT AT VESSEL
soft
key. The waypoint is added to the waypoint list and tagged using the next
available number.
The waypoint soft keys are displayed until you move the cursor away from
the waypoint or press
CLEAR
.
You can use the
EDIT WAYPOINT
soft key to name the waypoint as
described in Editing Waypoints below.
2. Press
CLEAR
or
ENTER
to remove the place waypoint soft keys.
➤
To place a waypoint as latitude/longitude using the Waypoint List:
1. Press MARKS , followed by the WAYPOINT LIST soft key. The Waypoint List
and associated soft keys are displayed.
D4169-1
PLACE WPT
AT CURSOR PLACE WPT
AT VESSEL WAYPOINT
LIST
MARKS
D5572-1
PLACE WPT
AT CURSOR PLACE WPT
AT VESSEL WAYPOINT
LIST
LOAD/SAVE
USER CARD
MARKS
PLACE WPT
AT CURSOR
PLACE WPT
AT VESSEL
D4163-1
GOTO
WAYPOINT
EDIT
WAYPOINT
ERASE
WAYPOINT
MOVE
WAYPOINT
MARKS
WAYPOINT
LIST