Raymarine hsb2 PLUS, Owner'S Handbook Manual

Page: 107 / 228

Chapter 4: Fishfinder Operations 4-11
W
aypoi
nts
4.6 Waypoints
The
MARKS
key lets you to place up to 998 waypoints. A waypoint is a
position, normally entered on a chart as a reference, or as a place to go to.
However, the
hsb 2
Plus Series units with Raychart functionality (L755RC
Plus, L760RC Plus, and L1250RC Plus) let you place waypoints in Fishfinder
mode as well as Chartplotter mode.
Waypoints are described fully in Chapter 5 . This section provides details that
are specific to placing Waypoints in Fishfinder mode.
A waypoint can be placed at the cursor position or at the vessel’s current
position (this is sometimes known as an event mark); all waypoints placed on
the Fishfinder are stored in a waypoint database list with position, depth and
temperature when it was placed.
Waypoints placed on the Fishfinder are displayed as a solid vertical line on the
scrolling bottom, Zoom and Bottom Lock displays. The waypoint number is
shown at the top of the vertical line. The waypoint scrolls to the left with the
scrolling bottom display.
If you place a waypoint at the cursor position in Fishfinder mode, and a chart
window is open, the waypoint is displayed on the chart. You can
GOTO, EDIT
and
ERASE
a cursor waypoint.
Note: When in chart mode, if you place a waypoint at the cursor position, it is
not shown on the Fishfinder display.
If you place a waypoint at the vessel position in Fishfinder mode it is shown in
the chart window.
Placing a Waypoint
➤
To access the place waypoint soft keys, press
MARKS
:
➤
To place a waypoint at the cursor position or at the vessel position:
1. Press either the
PLACE WPT AT CURSOR
or the
PLACE WPT AT VESSEL
soft
key. The waypoint is added to the waypoint list and tagged using the next
available number.
2. Press
CLEAR
or
ENTER
to remove the place waypoint soft keys.
MARKS
D4169-1
PLACE WPT
AT CURSOR PLACE WPT
AT VESSEL WAYPOINT
LIST
MARKS