Raymarine hsb2 PLUS, Owner'S Handbook Manual

Page: 162 / 228

6-2 hsb
2
Plus Series Fishfinders
Measu
ring
Di
st
an
ces U
sin
g
th
e
VR
M/EB
L K
ey
6.2 Measuring Distances Using the VRM/EBL Key
You can obtain an accurate measurement of the distance and bearing between
two points by using the
VRM/EBL
key.
➤
To place a ruler line and Ruler data box:
1. Position the cursor on the starting point from which you wish to measure.
2. Press
VRM/EBL
.
A Ruler data box is displayed showing the bearing and distance from the
starting point to the cursor position. The character
A
appears at the cursor
location.
3. Use the trackpad to move the cursor to the measurement end point. A line
connects the cursor to the starting point, and the Ruler data box is updated
to show the bearing and length of the line as shown in
Figure 6-1 .
4. Press ENTER to fix the end point of the ruler line, and return to normal cur-
sor control. The letter
B
marks the location of the end point on the chart.
Figure 6-1: Measuring Distance Using a VRM
VRM/EBL