Chapter 2: General Operation
7
Chapter 2: General Operation
2.1 Introduction
This chapter gives details of the general operation of the E-Series display, and covers
the following subjects:
• Powering the display on/off.
• Using the controls.
• Application display.
• Displaying and editing additional information.
• Adjusting the display lighting.
• Initial setup procedures.
• Using CompactFlash cards.
• Managing data.
• Operating a networked E-Series Display.
• Emergencies and warnings.
2.2 Powering the display ON/OFF
Power ON
Press the
POWER
button until the introductory logo is displayed. The keys
light up and after a few seconds an application page and a navigation
warning and weather data disclaimer is displayed. Read this information
and then press
OK
to remove it.
At this time the radar scanner (if fitted and powered) is checked for compatibility with
the display. An error message is displayed if the scanner is incompatible.
Power OFF
Press and hold the
POWER
button until the power down count reaches
zero. If the
POWER
button is released within the countdown period, power
off is cancelled.
Remember to replace the suncover to protect the display.
D6577-1
Summary of Contents for E120W
