Raymarine 530, Owner'S Handbook Manual

Page: 31 / 170

Chapter 2: Getting Started & Adjusting the Display 2-7
Sel
ec
ti
ng
the Mode
of
Operati
on
Selecting a Half-Screen Window for Display
Note: Windows can only be used with the Chart screen, they are not available
on the data log screen.
➤
To select a window for display:
1. Press the
DISPLAY
key. The following soft are displayed with an image of
each available window:
2. To select a different window, press either
SELECT WINDOWS
soft key until
the required window is highlighted. If necessary, this will toggle windows
on. Press
ENTER
.
3. To toggle windows off, press the
WINDOWS OFF ON
soft key.
Figure 2-3 shows the half-screen horizontal windows.
Returning to the Full-Screen Display
To return to the full-screen display you can turn windows off, as previously
described. Alternatively, to return to full-screen display:
➤
Press and hold the
DISPLAY
key for 2 seconds to return to the currently
selected full-screen (upper window) display.
DISPLAY
D4156-2
SELECT
WINDOWS
WINDOWS
OFF ON
DISPLAY