Rapid 4044, Installation, Operation & Service Manual

Page: 65 / 162

SECTION 14: D
ISCHARGE ACCESSORIES
57 of 154
SECTION 14: DISCHARGE ACCESSORIES
14.1 One-Way, Three-Way and Four-Way Dischar g e Head Installation
All discharge heads are shipped assembled. The discharge head is designed for mo u nting to the face of the
air handler (co v ering the s u pply air opening) or to an interior w all. All discharge heads m u st be field
s u pported (by others). The discharge head has fo u r o u t w ard-t u rned flanges. If the discharge head is to be
installed to the face of the air handler, install hard w are (pro v ided by others) on all fo u r sides of the discharge
head.
Discharge heads can be installed on horizontal or v ertical air handlers. To install the discharge head on an
interior w all, drill holes in the flanges on all fo u r sides of the discharge heads to accommodate lag bolts
(s u pplied by others). Sheet metal (s u pplied by others) may be req u ired.
Cons u lt factory for detailed installation instr u ctions based on u nit orientation and discharge location.
Crush Hazard
Use proper lifting
equipment and
practices.
Falling Hazard
Use proper safety
equipment and prac-
tices to avoid falling.
Severe Injury Hazard
Use proper lifting
practices and equip-
ment.
Equipment and
accessories are
heavy.
Cut/Pinch Hazard
Wear protective gear
during installation,
operation and
service.
Edges are sharp.
WARNING
Failure to follow these instructions can result in death, injury or property damage.