Rapid 4044, Installation, Operation & Service Manual

Page: 37 / 162

SECTION 6: L
IFTING AN
A
IR
H
ANDLER
(R
IGGING
)
29 of 154
6.3 Liftin g an Vertical Air Handler
FIGURE 17: Liftin g an Vertical Air Handler (All Models)
B A
C
B
A C
B
A
C
WOODEN BLOCKS
BASE FRAME
BASE FRAME
NOTE: SHEET METAL CHANNEL
OR ANGLE IRON FRAME MUST BE
ALIGNED ON ALL SECTIONS
INLET
Shipping Position:
1. Attach crane sling hooks to eye bolts A &
B (4 places.)
2. Lift off tr u ck.
3. Place on a clean flat dry s u rface free from
w ater, m u d, etc.
T u rning Position:
4. Remo v e eye bolts B. (2 places)
5. Attached eye bolts from B to corner C (2
places.)
6. Attach crane sling hook to A eye bolts A
(2 places.)
7. Slo w ly raise and rotate 90 degrees.
Vertical Position:
8. Place air handler section on 4" (10.2 cm)
w ooden blocks.
9. Attach crane sling hooks to eye bolts A &
C (4 places).
10. Air handler/section is no w ready to be
lifted into place.
NOTE:
On fan sections lifting l u gs are w elded on s u pply air end.