Rapid 4044, Installation, Operation & Service Manual

Page: 54 / 162

4000-S
ERIES
I
NSTALLATION
, O
PERATION AND
S
ERVICE
M
ANUAL
46 of 154
SECTION 9: INDOOR SUSPENSION MOUNTING - HORIZONTAL AIR HANDLER
9.1 Suspension Mountin g Assembly and Instructions
Indoor s u spension mo u nting is a v ailable for all models in horizontal orientation. S u spension mo u nts are
shipped assembled. The exterior frame perimeter incl u des additional L channel. Holes in the L channel allo w
for threaded rod to be u sed for s u spension. Threaded rod is pro v ided by others. Minim u m threaded rod size
is ¾".
NOTE: Check to be s u re all req u ired components are present. If there are any missing, contact Rapid
Engineering LLC or yo u r RAPID ® independent distrib u tor.
Once the s u spension frame is sec u re, the air handler may be mo u nted. See Page 27, Section 6.1 for safe
lifting practices.
Crush Hazard
Check blower assembly per
maintenance section.
Lack of blower assembly
maintenance can cause
excessive vibration.
Excessive vibration can
cause support failure.
WARNING
Failure to follow these instructions can result in death, injury or property damage.
Crush Hazard
Hanging hardware must
support equipment weight.
Do not hang by lifting lugs.
Crush Hazard
Use proper lifting equip-
ment and practices.
WARNING
Failure to follow these instructions can result in death, injury or property damage.
Falling Hazard
Use proper safety
equipment and practices to
avoid falling.
Severe Injury Hazard
Use proper lifting practices
and equipment.
Equipment and accessories
are heavy.
Cut/Pinch Hazard
Wear protective gear during
installation, operation and
service.
Edges are sharp.