Instrument control
R&S
®
SMCV100B
69
Getting Started 1432.7046.02 ─ 04
1
2
3
5
4
Figure 8-3: Taskbar fully assigned
1 = System configuration
2 = Graphics
3 = Remote control connections
4 = Dialogs
5 = Diagram / more
1
System Config
Provides access to general system configurations
like setup, display, or remote.
2
Graphics
Shows that a signal is represented graphically.
3
Remote
Shows the established remote connections when
the instrument is remotely controlled.
Tip:
An indicator in the status bar shows the current
remote control status.
4
Dialogs
Shows a dialog as a thumbnail, the dialog name,
and the name of signal channel.
5
Diagram / more
The diagram icon as shown in
all dialogs indicated on the screen. The block dia-
gram is in the foreground.
The "More" softkey indicates that more dialogs are
open than can be displayed in the taskbar. Use this
softkey to open a selection list with the remaining
active dialogs, and the "Diagram" function.
8.3.4
Additional display characteristics
The following section provides a short insight on the indication of the screen in
general, and significant elements that you see under specific operating modes, in
dialogs or settings.
●
Appearance of active elements
–
Active
elements like On/Off switches, state buttons have a
blue
back-
ground.
–
Selected
elements are framed or highlighted
orange
.
–
Inactive
elements are
gray
.
●
On-Screen keypads
Understanding the display information
