R&S SMCV100BP1, Getting Started

Page: 35 / 81

Instrument tour
R&S
®
SMCV100B
35 Getting Started 1432.7046.02 ─ 04
LAN
RJ-45 connector to connect the R&S SMCV100B to a LAN for remote control,
remote operation, and data transfer.
How to:
Chapter 4.7, "Connecting to LAN" , on page 20
USB
Two female USB (universal serial bus) 3.0 connectors of type A (host USB). They
have the same functionality as the USB connectors on the front panel, but provide
higher data rates. See
"USB" on page 33.
How to: Chapter 4.9, "Connecting USB devices" , on page 22.
Dig. IQ HS x
Connectors for the input/output of high-speed digital I/Q signals, for example,
from and to Rohde
& Schwarz instruments.
Table 5-4 lists the interface designation (input/output) and the required option.
For more information, see data sheet.
Table 5-4: Overview of Dig. IQ HS x interfaces and required options
Interface Designation Required option
Dig. IQ HS 1 "BB Input" R&S SMCVB-K19 digital baseband interface
Dig. IQ HS 2 "I/Q Digital Out"
The interface is a QSFP+ (Quad Small Form-factor Pluggable) module. It sup-
ports max. bandwidth of up to 50 Gsample/s with optical active cables.
How to:
Chapter 4.12, "Connecting to Dig. IQ HS x" , on page 24
IP Data
Interface for input of IP data for real-time encoding in broadcast baseband sig-
nals.
The interface comprises a SFP+ (Small Form-factor Pluggable) socket.
How to:
Chapter 4.13, "Connecting to IP Data interface" , on page 26
User x
BNC multipurpose connectors for defining input signals and output signals.
Table 5-5 lists the signals assigned to the User x connectors in the default instru-
ment state.
Rear panel tour