Trying out the instrument
R&S
®
SMCV100B
38
Getting Started 1432.7046.02 ─ 04
6.1
Generating an unmodulated carrier
We start out by generating a simple unmodulated signal. The R&S
SMCV100B
has a minimum configuration as in
1. On the R&S
SMCV100B front panel, press the Preset key to start out in a
defined instrument configuration.
2. Set the frequency:
a) On the "Status Bar", tap the "Frequency" field.
b) On the on-screen keypad, enter
1.955
and press the "GHz" key.
The on-screen keypad closes and the frequency value is displayed.
3. On the "Status Bar", tap the "Level" field and enter the level in the same way.
4. Select "Block Diagram > RF Block > On" to enable the output of the generated
unmodulated signal.
Generating an unmodulated carrier
