Trying out the instrument
R&S
®
SMCV100B
44
Getting Started 1432.7046.02 ─ 04
The instrument uses its internal trigger and clock signals, and the default map-
ping of the marker signals to the User connectors.
2. To access the related connector settings, perform one of the following:
● Select "Global Connector Settings"
● Tap the connector name, for example select the connector "User 1"
Figure 6-5: Signal mapping to the global connectors
The "Global Connectors" dialog displays the current connectors configuration.
The settings are configurable, but in this example we use the default mapping.
3. Alternatively, select "Block Diagram > Baseband > Misc > Custom Digital
Mod", select the "Trigger In" tab and select "Global Connector Settings".
In the current mapping, the two global connectors
on the rear panel are
configured as follows:
● "Baseband Marker" signal is output at the "User 1" connector.
The LED next to the connector is orange.
Triggering the instrument with an external signal
