13
GB
INTRODUCTION
INSTALLATION PREPARATIONS
On this page, we have listed points to be aware of
before starting the installation of the gas fireplace.
NOTE!
Placement and construction preparations
•
If the installation is made in an existing chimney, clean the chimney before installation.
•
Install the fireplace on a solid floor that can hold the weight of the fireplace.
•
When building the fireplace, make sure to install ventilation beneath and above the fireplace for a natural
draught. This will prevent high temperatures that can damage the installation or fireplace.
•
Never use combustible building materials.
•
Do not install the fireplace against a flammable rear wall.
•
Protect the ceiling if it is made of flammable material.
•
Comply to the fireproof distances stated in this manual. See the exact distances on page 36.
•
When the fireplace has been placed, make sure it is level and straight.
•
The glass on the fireplace needs to be cleaned before using it the first time, otherwise fingerprints, etc.,
can burn to the glass.
Preparations for electrical and gas supply
•
The gas supply and electrical supply should be located under the fireplace in the area where the
inspection grate will be installed. We recommend installing the gas supply with a flexible approved
system.
•
The electrical parts should always be accessible.
•
Make sure to calculate the right diameter for the gas supply for correct function of the fireplace.