31
GB
INSTALLATION
ELECTRICAL CONNECTION
The following electrical parts accompany this gas fireplace:
CONNECTING THE LED BOX
The LED box must be connected to the power supply
(see arrow A).
The LED box can be positioned on the retractable
inspection grate (optional).
CONNECTING THE RECEIVER
The wide yellow/blue/green connector on the LED box
must be inserted in the receiver (see arrow B).
If there is a power failure, four AA batteries can be fitted
in the receiver. If batteries are used in the receiver, the
LED light and WiFi module will not operate.
LED box
Power supply/
adapter 12V
Receiver
WARNING!
The power supply (12V adapter) may NOT be directly connected to the receiver, otherwise this could lead to overheating
and functional failure.
Sockets must always be accessible.
Make sure that the electrical cables do not touch the fireplace or are placed higher than the fireplace if within 1 metre of
the fireplace.
If batteries are used in the receiver, replace the batteries at the beginning of each heating season.
A
B