Radyne MM200, Installation And Operation Manual

Page: 73 / 192

MM200 High-Speed Microwave Modem User Interfaces
TM086 - Rev. 4.1 4-49
Group Context/Community Security Level Read Access Write Access
NULL mib2 NoAuth/noPriv System view NONE
Viewer mib2 Auth/noPriv MIB-II view NONE
Viewer Dev Auth/Priv Device view NONE
Oper mib2 Auth/noPriv MIB-II view MIB-II view
Oper Dev Auth/Priv Device view Device view
The NULL Security Name is for backward compatibility with SNMP Version 1 and 2 management
stations (security names are not defined for earlier protocols). In this case, the contextName in
each view may refer to either a contextName or a communityName. The securityLevel would then
be noAuth/noPriv.
4.40 Verification
4.41 Connect the Ethernet Cable
1.
Connect the computer to the MM200 Ethernet port using the RJ-45 to RJ-45 10BaseT
Cables via a hub as shown below.
Figure 2.