Radyne MM200, Installation And Operation Manual

Page: 115 / 192

MM200 High-Speed Microwave Modem Appendix A
TM086 – Rev. 4.1 A-15
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<4>
<2>
<4>
<4>
Minor Alarm1 Status
Minor Alarm2 Status
Common Alarm1
Status
Common Alarm2
Status
Latched Major
Alarm1 Status
Latched Major
Alarm2 Status
Latched Minor
Alarm1 Status
Latched Minor
Alarm2 Status
Latched Common
Alarm1 Status
Latched Common
Alarm2 Status
Carrier Status
Spare
Max Payload
Utilization
Bandwidth
APC Minimum Tx
Level
0 = Pass, 1 = Fail
Bit 0 = Tx clock activity detect
Bit 1 = Tx data activity detect
Bit 2 = Frame Lock
Bits 3 – 7= Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = Mask, 1 = Allow
Bit 0 = Glue Logic FPGA Fail
Bit 1 = Data FPGA Fail
Bits 2 – 7 = Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = Pass, 1 = Fail
Bit 0 = Glue Logic FPGA Fail
Bit 1 = Data FPGA Fail
Bits 2 – 7 = Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = Pass, 1 = Fail
Bit 0 = Tx clock activity detect
Bit 1 = Tx data activity detect
Bit 2 = Frame Lock
Bit 3 = Spare
Bits 4 – 7 = Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = Pass, 1 = Fail
Bits 0 – 7 = Spare
0 = off, 1 = on
Maximum payload at current modulation
% utilization, implied decimal point (i.e. 7985 means 79.85%)
Current bandwidth usage
Minimum APC transmit level
(Not Yet Implemented)
Opcode: <0x2098> Query the demodulator diversity status