Radyne MM200, Installation And Operation Manual

Page: 25 / 192

MM200 High-Speed Microwave Modem User Interfaces
TM086 - Rev. 4.1 4-1
User Interfaces
4
4.0 User Interfaces
There are four user interfaces available for the MM200. These are:

Front Panel Control.

Command Interface Control.

Terminal Interface

Ethernet SNMP
Any of these methods may be used separately or together to monitor and control the MM200.
Each of these interfaces and their respective methods are discussed separately below.
4.1 Front Panel User Interface
The front panel of the MM200 allows for complete monitor and control (M&C) of all parameters
and functions via a keypad, LCD display and status LEDs.
The front panel layout is shown in Figure 4
−
1, showing the location and labeling of the front panel.
The front panel is divided into four functional areas: the Front Panel LCD Display, the Cursor
Control Arrows, the Numeric Keypad, and the Front Panel LED Indicators, each described below
in Table 4-1.
Figure 4-1. MM200 Front Panel Controls and Indicators
Table 4-1
Item No. Description Function
1 Front Panel LCD Display Displays MM200 Operating parameters and
Configuration data.
2 Cursor Control Arrows Controls the up, down, left, and right movement
of the cursor in the Front Panel LCD Display.
3 Numeric Keypad Allows entry of numeric data, and the Clear and
Enter function keys.
4 Front Panel LED
Indicators Refer to Section 4.1.2 for an itemized description
of these LEDs.