Radyne MM200, Installation And Operation Manual

Page: 129 / 192

MM200 High-Speed Microwave Modem Appendix A
TM086 – Rev. 4.1 A-29
<1>
<1>
<1>
<1>
Reserved
Interface PRBS
Interface Major
Alarm1 Mask
Interface Minor
Alarm1 Mask
Spare
0 = normal
1 = prbs_23
2 = prbs_23m
3 = prbs_15
4 = prbs_15m
(Not Yet Implemented)
0 = Mask, 1 = Allow
Bit 0 = Interface Test
Bit 1 - 7 = Spare
0 = Mask, 1 = Allow
Bit 0 = Interface FIFO full
Bit 1 = Interface FIFO empty
Bit 2 = PLL lock
Bit 3 = Interface data activity detect
Bit 4 = Interface clock activity detect
Bit 5 = Interface Tx input framing valid, added for AASI
Bit 6 = Interface signal loss, valid for some interfaces
Bit 7 = Spare
Status Bytes
<1>
<1>
<1>
<1>
<1>
Interface Major
Alarm1
Interface Minor
Alarm1
Interface Latched
Major Alarm1
Interface Latched
Minor Alarm1 Status
Interface Card
Status 0 = Pass, 1 = Fail
Bit 0 = Interface Test
Bit 1 - 7 = Spare
Status 0 = Pass, 1 = Fail
Bit 0 = Interface FIFO full
Bit 1 = Interface FIFO empty
Bit 2 = PLL lock
Bit 3 = Interface data activity detect
Bit 4 = Interface clock activity detect
Bit 5 = Interface Tx input framing valid, added for AASI
Bit 6 = Interface signal loss, valid for some interfaces
Bit 7 = Spare
Status 0 = Pass, 1 = Fail
Bit 0 = Interface Test
Bit 1 - 7 = Spare
0 = Pass, 1 = Fail
Bit 0 = Interface FIFO full
Bit 1 = Interface FIFO empty
Bit 2 = PLL lock
Bit 3 = Interface data activity detect
Bit 4 = Interface clock activity detect
Bit 5 = Interface Tx input framing valid, added for AASI
Bit 6 = Interface signal loss, valid for some interfaces
Bit 7 = Spare
0 = None
1 = ASI/AASI
2 = ASIS
3 = NASI