option is set. Configure the maximum amount of downtime in minutes
for which the link could not be established.
Settings
The maximum segment size defines the largest amount of data of TCP packets (usually MTU minus
40). You may decrease the value in case of fragmentation issues or link-based limits.
MSS adjustment
Enable or disable MSS adjustment on WAN interfaces.
Maximum segment size
Maximum number of bytes in a TCP data segment.
7.2.2. Ethernet
M!DGE/MG102i routers ship with 2 (MG102i has 5) dedicated Ethernet ports (ETH1 and ETH2) which
can be linked via RJ45 connectors.
ETH1 usually forms the LAN1 interface which should be used for LAN purposes. Other interfaces can
be used to connect other LAN segments or for configuring a WAN link. The LAN10 interface will be
available as soon as a pre-configured USB Ethernet device has been plugged in (e.g. X5 Ethernet/USB
adapter).
Port Setup - Port Assignment
This menu can be used to individual assigning of Ethernet ports to LAN interfaces if you want to have
different subnets per port or to use one port as the WAN inteface.
If it is desired to have both ports in the same LAN you may assign them to the same interface. Please
note that the ports will be bridged by software and operated by running the Spanning Tree Protocol.
MG102iGPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o.
30
Web Configuration
Summary of Contents for MG102i
Page 2: ......
Page 147: ...147 RACOM s r o MG102iGPRS UMTS HSPA LTE router Web Configuration...
Page 174: ...174...
