Allow clients from
Specifies where clients can connect from, can be either
every-
where
or from a specific network.
Clients start
Specifies how client reception is started upon connect. You can
specify
on request
, which typically requires an R to be sent, or
raw/super-raw
mode which will transmit NMEA frames to the
client instantly. If the client supports the JSON format (i.e. newer
libgps is used) the
json
mode can be specified.
SUPL host/port (in case of A-
GPS)
The SUPL host/port (IP, hostname) which provides us the informa-
tion of GPS satellites via data transmission.
APN
Access point name (the same as for data transmission set for the
mobile connection).
Note
Please consider to restrict access to the server port, either by a specifying a dedicated client
network or by using a firewall rule.
Position
This page shows the current position of the box together with a location map.
Latitude
The geographic coordinate specifying the north-south position.
Longitude
The geographic coordinate specifying the east-west position.
Altitude
The height above sea level of the current location.
65
© RACOM s.r.o. – MG102iGPRS/UMTS/HSPA+/LTE router
Web Configuration
Summary of Contents for MG102i
Page 2: ......
Page 147: ...147 RACOM s r o MG102iGPRS UMTS HSPA LTE router Web Configuration...
Page 174: ...174...
