RACOM MG102i, Operating Manual

Page: 152 / 175

set [-hv] <parameter>=<value> [<parameter>=<value>..]
Options:
-v validate config parameter
See the following example for setting configuration digital output values. Both values will be "off" and
both values will be also "off" after the next start-up procedure.
> set dio.out1=off
> set dio.out2=off
8.5. Updating system facilities
The update command can be used to perform various system updates.
> update -h
Usage:
update [-hfrsn] <software|config|license|sshkeys> <URL>
Options:
-r reboot after update
-f force update
-n don't reset missing config values with factory defaults
-s show update status
Available update targets:
software Perform software update
firmware Perform module firmware update
config Update configuration
license Update licenses
sshkeys Install SSH authorized keys
8.6. Manage keys and certificates
The update command can be used to manage keys and certificates.
> cert -h
Usage:
cert [-h] [-p phrase] <operation> <cert> [<url>]
Possible operations:
install install a certificate from specified URL
create create a certificate locally
enroll enroll a certificate via SCEP
erase erase an installed certificate
view view an installed certificate
MG102iGPRS/UMTS/HSPA+/LTE router – © RACOM s.r.o. 152
Command Line Interface